Canon G3 Error Code List page 222

Chapter 2: Service Error Codes
##1088 [ TX/RX ] Incompatible destination
Cause
• Cause number #88 (Incompatible destina-
tion) arrived from the network. The other
party is set to a call mode different from
the machine.
• A different terminal responded, but it is
bus-connected to the other party.
##1089 [ TX/RX ] Lane busy
Cause
• Cause number #89 (Lane busy) arrived
from the network.
Remedy
• Check the model and the communication
mode (G4, G3, TEL) of the other party,
and start a communication once again.
• Print out a communications analysis list,
and analyze it.
• Contact the telephone company or the ex-
change manufacturer to find out the nature
of cause number #88.
• Ask the operator of the other party to dis-
connect other terminals from the line, and
start a communication once again.
• Print out a communications analysis list,
and analyze it.
• Contact the telephone company or the ex-
change manufacturer to find out the nature
of cause number #88.
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
• Contact the telephone company or the ex-
change manufacturer to find out the nature
of cause number #89.
2-162
[German model]