Canon G3 Error Code List page 72

Chapter 2: Service Error Codes
##101 [ TX/RX ] The modem speed of the machine does
Cause
• The modem speed of the machine does not
match that of the other machine.
• In the case of transmission, the speed for
fallback does not match that of the other
party.
##102 [ TX ] Fallback is not possible
Cause
• The line condition is poor, and the other
party cannot receive TCF correctly.
• An echo has caused a malfunction.
not match that of the other party
Remedy
• The modem speed is part of machine speci-
fications, and there is no remedy.
• Increase the transmission level
other party may receive TCF correctly.
• Adjust the NL equalizer
party may receive TCF correctly.
• Provide echo remedy 1 or 2
• Using a manual call, press the Start button
after hearing the 1st DIS from the other party.
• To prevent response to the 1st DIS from
the other party, put a relatively long pause
to the telephone number when registering
an auto-dialing number.
• Ask the operator of the other party to de-
crease the transmission level
other party will not receive an echo.
Remedy
• Increase the transmission level
other party may receive TCF correctly.
• Adjust the NL equalizer
party may receive TCF correctly.
• Provide echo remedy 1
• Using a manual call, press the Start button
after hearing the 1st DIS from the other
party.
• To prevent response to the 1st DIS from
the other party, put a relatively long pause
to the telephone number when registering
an auto-dialing number.
• Ask the operator of the other party to pro-
vide echo remedy 2
• Ask the operator of the other party to de-
crease the transmission level
other party will not receive an echo.
2-12
*1 so that the
*2
so that the other
*7
.
*1
so that the
*1
so that the
*2
so that the other
*7
.
*7 .
*1
so that the