Canon G3 Error Code List page 112

Chapter 2: Service Error Codes
##295 [ TX ] For the auto alarm notification function,
Cause
• NFS of NTT expansion (NSX specifica-
tion) was received from the other party (re-
mote center), but the bit of the NFS does
not have a remote maintenance function.
## [
Cause
the other party does not have an NTT
remote maintenance function [NTT model]
]
2-52
Remedy
• Check to see that the registered data for
the facsimile auto alarm function is cor-
rect. To check, refer to [Center Name] and
[Center Number] in service mode (#11
AUTO ALARM).
• If the registered data is correct, contact the
NTT Remote Maintenance Center, and ask
for an investigation of the fault using an
auto alarm test.
Remedy