Canon G3 Error Code List page 234

Chapter 2: Service Error Codes
##1132 [ TX/RX ] The timer went ON waiting for a response
Cause
• A command was issued to the CCU, but
no response came.
##1145 [ TX/RX ] The call settings have not been made
Cause
• The call setting failed without receiving a
cause number.
from the CCU
Remedy
• Turn off and then on the power.
• Replace the PCB that includes the CCU.
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
2-174