Fif - Canon G3 Error Code List

Appendix

2.15 FIF

DIS, DTC, and DCS are used to communicate particulars of facsimile functions to the other
party by means of FIF (Facsimile Information Field), which is the portion of a signal that carries
information.
• FIF of DIS and DTC
The FIF of DIS and the FIF of DTC possess the same format and the same meaning, and
are used to communicate to the other party the functions relating to reception.
Bit No.
1 Store and forward Internet fax - Simple mode (Rec.T.37):
(0)=Not provided, (1)=Provided
2 Reserved
3 Real-time Internet fax (Rec.T.38): (0)=Not provided, (1)=Provided
4 Reserved
5 Reserved
6 V.8 capabilities
7 (0)=256 octets preferred, (1)=64 octets preferred
8 Reserved
9 Ready to transmit a facsimile document (polling):
(0)=Not provided, (1)=Provided
10 Receiver fax operation
11, 12, Data signalling rate:
13, 14 (0000)=V.27 ter fall-back mode (2400bps)
(0100)=Rec. V.27 ter (4800bps, 2400bps)
(1000)=Rec. V.29 (9600bps, 7200bps)
(1100)=Recs. V.27 ter and V.29 (9600bps, 7200bps, 4800bps, 2400bps)
(1101)=Recs. V.27 ter, V.29 and V.17 (1400bps, 12000bps, 9600bps,
(others)=Not used or Reserved
15 R8x7.7lines/mm and/or 200x200pels/25.4mm:
(0)=Not provided, (1)=Provided
16 Two-dimensional coding capability: (0)=MH only, (1)=MH and MR
17, 18 Recording width capabilities:
(00)=A4, (01)=A4, B4 and A3, (10)=A4 and B4, (11)=Invalid
19, 20 Recording length capability:
(00)=A4, (01)=Unlimited, (10)=A4 and B4, (11)=Invalid
Table 2 FIF of DIS and DTC
Meaning/Function
7200bps, 4800bps, 2400bps)
A-14