##738
[ RX ] In CHT reception, the block number did not
Cause
• The procedure signal is faulty.
##739
[ RX ] In CHT reception, a buffer memory
Cause
• The procedure signal is faulty (i.e., the busy
state of that machine does not end in 30
sec after transmission of RNR).
match
Remedy
• Record the protocol on a DAT or MD, and
have it analyzed by the local Canon office
and/or Technical Center.
overflow occurred
Remedy
• Record the protocol on a DAT or MD, and
have it analyzed by the local Canon office
and/or Technical Center.
2-105
Chapter 2: Service Error Codes