Canon G3 Error Code List page 296

• FIF of DCS
FIF of DCS is used to communicate to the other party the functions relating to transmis-
sion.
Bit No.
1 Store and forward Internet fax - Simple mode (Rec.T.37):
(0)=Not selected, (1)=Selected
2 Reserved
3 Real-time Internet fax (Rec.T.38): (0)=Not selected, (1)=Selected
4 Reserved
5 Reserved
6 Invalid
7 Invalid
8 Reserved
9 Set to "0"
10 Receiver fax operation
11, 12, Data signalling rate:
13, 14 (0000)=2400bps, Rec. V.27 ter
(0100)=4800bps, Rec. V.27 ter
(1000)=9600bps, Rec. V.29
(1100)=7200bps, Rec. V.29
(0001)=14400bps, Rec. V.17
(0101)=12000bps, Rec. V.17
(1001)=9600bps, Rec. V.17
(1101)=7200bps, Rec. V.17
(others)=Invalid or Reserved
15 R8x7.7lines/mm or 200x200pels/25.4mm: (0)=Not selected, (1)=Selected
16 Two-dimensional coding: (0)=MH, (1)=MR
17, 18 Recording width: (00)=A4 (01)=A3 (10)=B4 (11)=Invalid
19, 20 Recording length: (00)=A4 (01)=Unlimited (10)=B4 (11)=Invalid
21, 22, Minimum scan line time:
23 (000)=20ms, (001)=40ms, (010)=10ms, (100)=5ms, (111)=0ms
24 Extend field:
(0)=FIF is up to this bit, (1)=FIF is extended by 8bits after this bit
25 Reserved
26 Uncompressed mode:
(0)=Not selected, (1)=Selected, (0) on Canon machines
27 Error correction mode (ECM): (0)=Not selected, (1)=Selected
Table 3 FIF of DCS
Meaning/Function
A-19
Appendix