MECHANICAL SYSTEM
B. Lens Drive Assembly
1. Removing the Lens Drive Motor
1) Remove the upper rear cover and the right
glass retainer.
2) Remove the copyboard glass.
3) Move the No. 1 mirror assembly
4) Remove the two screws
lens cover
.
2
1
(front)
Figure 4-217
5) Loosen the tension on the spring
move the cable
.
5
4
Figure 4-218
4–10
to the left.
, and remove the
2
3
, and re-
COPYRIGHT © 1998 CANON INC.
6) Disconnect the two connectors
6
Figure 4-219
7) Remove the two screws
lens drive unit
.
8
7
Figure 4-220
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
from the rear.
, and remove the