Safety Instructions - Brother MFC5200C Service Manual

SAFETY INSTRUCTIONS

SAFETY PRINCIPLE
1) Before starting any operations, read this manual thoroughly. Especially read the safety instructions in this
section carefully and ensure that you understand the contents.
2) Perform all the operations by following the procedures described in this manual. Follow all the cautions
and warnings set out in the procedures and on safety labels affixed to the machine. Failure to do so may
result in human injury or equipment damage.
3) Perform only the procedures explained in this manual. Refrain from opening or touching any portions that
are not related to your required operation(s).
4) Repair and replacement of parts should be performed by trained and qualified persons only.
Operators should not attempt to do such repair or replacement work.
5) It must be appreciated that the above-mentioned cautions and warnings do not cover everything because it
is impossible to evaluate all the circumstances of repair situations.
SPECIAL SAFETY INFORMATION
Cautions and warnings are made clear by following the 'Safety Alert Symbols' or 'Signal Words' such as
DANGER, WARNING and CAUTION.
1) SAFETY ALERT SYMBOL
This is the safety alert. When you find this symbol placed on the equipment or marked in this manual, be
aware of the potential of human injuries. Follow the recommended precautions and safety operation
practices.
2) Understanding Signal Words
DANGER is used to indicate the presence of a hazard which will cause severe human injuries or a fatal
accident if the warning is ignored.
WARNING is used to indicate the presence of a hazard or unsafe practices which may cause severe
human injuries or a fatal accident if the warning is ignored.
CAUTION is used to indicate the presence of a hazard or unsafe practices which may cause minor human
injuries if the warning is ignored. CAUTION also calls your attention to safety messages in this manual.