Brother MFC5200C Service Manual page 33

Step A: Color Block Quality Check
1. The LCD shows:
IS STEP "A"OK?
1. YES 2.NO
Check the quality of the four color blocks printed
on the sheet.
MAGENTA)
2. If the quality is OK for all colors, press the "1"
key on the dial pad to go to STEP B: Alignment
Check.
---OR---
If white horizontal lines appear in some of the color
blocks, press the "2" key on the dial pad and go to
3.
3. The LCD asks you if the print quality is OK for
each color. Press the "1" key or "2" key on the
dial pad.
BLACK OK?
2
1.YES 2.NO
When you have finished selecting the "1" key
(YES) or the "2" key (NO) for magenta, the LCD
shows:
START CLEANING?
1.YES 2.NO
Press the "1" key (YES), and then machine starts
cleaning the colors.
After cleaning is finished, press the Fax
Start key. The machine starts printing PRINT
QUALITY CHECK SHEET again and goes back to
the first step of STAP A.
(BLACK/CYAN/YELLOW/
Step B: Alignment Check
The LCD shows:
IS STEP "B"OK?
1. YES 2.NO
Check the 600 DPI and 1200 DPI test print to see if
No.5 most closely matches the OK sample (No.0).
Press the "1" key if No.5 matches it.
If another test print number is a better match for
either 600 DPI or 1200 DPI, press the "2" key to
select NO and go to 2.
2. For 600 DPI, select the number from 1 to 8
that most closely matches the No.0 sample
and enter it using the dial pad.
600DPI ADJUST
SELECT BEST #
3. For 1200 DPI, enter the number from 1 to 8
that most closely matches the No.0 sample.
1200DPI ADJUST
SELECT BEST #
The quality check is now complete.
3 -9