Brother MFC5200C Service Manual page 119

(4) Pull each of the carriage rail clamp springs in the direction of the arrow shown below to
release it from the three latches on the main chassis.
(5) Pull out the carriage rail to the right.
Carriage rail
Main chassis
Carriage rail
clamp spring
(6) Take the carriage out of the main chassis.
NOTE: Three oil-impregnated carriage felts will drop from the carriage.
(7) Remove the carriage timing belt from the back of the carriage.
Carriage timing belt
Carriage
Carriage
End of the carriage rail
(Rear)
Viewed from the bottom
6 -5 7
Carriage rail
clamp spring
Latches
NEVER touch here!
Oil-impregnated carriage felts
NEVER remove or
loosen this screw!
Latch
Carriage