Display Of The Equipment's Log Information - Brother MFC5200C Service Manual

7.5.18 Display of the Equipment's Log Information

Function
The equipment may display the its log information on the LCD.
Operating Procedure
(1) Press the 8 and 0 keys in this order in the initial stage of the maintenance mode.
The USB serial number appears on the LCD.
(2) Press the Fax Start key. Each time the Fax Start key is pressed, one of the following log
information items appears on the LCD in the order given below.
1) Ink cartridge drop count, indicating how many droplets have been jetted out from each of
the ink cartridges*
2) Ink drop count after near-empty, indicating how many droplets have been jetted out from
each of the ink cartridges*
3) Total ink drop count, indicating how many droplets the equipment has been jetted out
from each of the ink cartridges*
4) Jam count, indicating how many times a paper jam has been occurred
5) Total page count, indicating how many pages have been printed since the equipment was
produced
6) PC print page count, indicating how many pages the equipment has been printed as an
output device of the connected PC
7) Copy page count, indicating how many copies have been made
8) FAX page count, indicating how many received FAX pages have been printed
9) Purge count, indicating how many times the purge operation has been carried out
10) Wiper count, indicating how many times the wiper operation has been carried out
11) Ink cartridge change count, indicating how many times ink cartridge replacement has been
made for each color*
12) Error code of the most recent machine error*
13) Error code of the most recent communications error*
14) ADF jam count, indicating how many times a document jam has been occurred
15) ADF page count, indicating how many documents have been fed
16) Flat-bed page count, indicating how many documents have been scanned
(3) To stop this operation and return to the equipment to the initial stage of the maintenance
mode, press the Stop key.
1
* To check each of the four ink cartridges, press the Menu key. Pressing the key cycles through
black, yellow, cyan, and magenta.
2
* When a machine error code is displayed, pressing the Menu key cycles through recent nine
errors that have occurred.
3
* When a communications error code is displayed, pressing the Menu key cycles through the
latest error, 2nd latest error, and 3rd latest error.
1
1
after the ink empty sensor detects near-empty
1
since produced
1
7 -2 8
2
3