Paper Chute; Star Wheel Support And Platen - Brother MFC5200C Service Manual

6.1.24 Paper Chute

(1) Remove the two screws from the paper chute and take it off from the main chassis.
Taptite, cup S
M3x6

6.1.25 Star Wheel Support and Platen

(1) For easier removal of the star wheel support, remove the screw that secures the sensor support
of the ink empty sensor PCB.
NOTE: The sensor support cannot be released from the main chassis completely since the ink
empty sensor harness is routed on the underside of the main chassis.
(2) Remove the two screws that secure the star wheel support.
Sensor support
(Ink empty sensor PCB)
Shoulder screw
Paper chute
Star wheel support
Main chassis
Taptite, pan B M3x10
Taptite, cup S M3x6
6 -6 5
(Front)
Platen
Paper ejection roller