Replacing The Ink Cartridge - Brother MFC5200C Service Manual

5.2 REPLACING THE INK CARTRIDGE

Your machine is equipped with an optical sensor that automatically monitors the ink level in each
color cartridge. When the sensor detects an ink cartridge is running out of ink, the machine will
notify you with a message on the LCD.
The LCD shows you which color cartridges are low or empty. Be sure to follow the LCD prompts
so you replace the color cartridges in the appropriate order.
When the ink cartridges are running low, you must use the Ink key to begin the cartridge
replacement (Steps 1 to 3). If the ink is empty, skip to Step 4.
1. Press Ink key.
2. Press
3. Press Menu/Set key.
If one or more ink cartridges are empty, for example Black, the LCD shows "INK EMPTY
BLACK" and "PLS OPEN COVER".
4. Pull the Scanner cover release lever and lift the Scanner cover.
5. Press the appropriate colored ink cartridge cover to open it, and then remove the ink cartridge.
6. Open the new ink cartridge bag for the color shown on the LCD, and then take out the ink
cartridge.
7. Hold the new ink cartridge as shown in the
illustration, and then peel the sealing tape from
the side of the ink cartridge. Carefully peel the
tape in the direction away from you.
To prevent spilling ink and staining your hands
and clothing, remove the sealing tape gently.
8. Each color has its own correct position. Insert the new ink cartridge into its carriage, and then
close the ink cartridge cover by pressing until it clicks.
or to choose "2.REPLACE INK".
5 -3