Main Pcb Shield Case And Scanner Unit (Together With Document Cover) - Brother MFC5200C Service Manual

6.1.7 Main PCB Shield Case and Scanner Unit (Together with Document Cover)

(1) Remove the two screws from the main PCB shield case and pull out the main PCB shield case
in the direction of arrows
NOTE: Take care not to scratch the CCD flat cable routing above the main PCB shield case.
NOTE: After the rear cover and main PCB shield case have been removed, you may install an
optional LAN board to the main PCB.
Taptite, cup S
M3x6
and
Taptite, cup B
M3x10
(Rear)
Main PCB shield case
.
CCD flat cable
6 -2 5
Main PCB
Main PCB shield frame