Brother MFC5200C Service Manual page 78

(4) Remove the screw and take the ADF thickness adjuster out of the upper ADF chute.
NOTE: The ADF thickness adjuster is lubricated with grease, so take care not to smear
surrounding parts with the grease when handing the ADF thickness adjuster.
(5) At either end of the pressure roller shaft, press the latch to the right and take out the pressure
rollers and their shaft. Then remove their springs.
Pressure rollers
Pressure roller shaft
Pressure roller
springs
ADF thickness adjuster
Upper ADF chute
(Rear)
Latches
Wrong position:
Boss placed on the guide
Taptite, pan B M3x6
When setting the ADF thickness adjuster,
do not put the boss provided on the underside
of the adjuster on the guide.
6 -1 6
ADF thickness adjuster
Lubricated with grease
Correct position
of the boss
Guide