Catalyst 2980G Switch; Supervisor Engine Software - Cisco WS-C2948G-GE-TX Configuration Manual

Chapter 1 Product Overview

Supervisor Engine Software

The Catalyst enterprise LAN switches share a command-line interface (CLI) with which you can
configure modules and ports on the switches. For more information, see Chapter 2, "Using the
Command-Line Interface." For descriptions of the available CLI commands, refer to the
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Command
Reference.
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Software Configuration Guide—Release 8.2GLX
1-4
78-15908-01