Cisco WS-C2948G-GE-TX Configuration Manual page 68

Understanding How Gigabit Ethernet Works
Table 5-1
Switch Type
Catalyst 4000
Catalyst 4500
Catalyst 4000
Catalyst 4500
Catalyst 4000
Catalyst 4500
Catalyst 4000
Catalyst 4500
Catalyst 4000
Catalyst 4500
Catalyst 4000
Catalyst 4500
Catalyst 4000
Catalyst 4500
Catalyst 4000
Catalyst 4500
Catalyst 2948G
Catalyst
2948G-GE-TX
Catalyst 2980G
Using Flow-Control Keywords
Table 5-2
with the set port flowcontrol command.
Table 5-2
Configuration
send on
send off
send desired
receive on
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Software Configuration Guide—Release 8.2GLX
5-2
Send Capability by Switch Type, Module, and Ports
Module
All modules except WS-X4418-GB
and WS-X4412-2GB-T
WS-X4418-GB
WS-X4418-GB
WS-X4412-2GB-T
WS-X4412-2GB-T
WS-X4424-GB-RJ45
WS-X4448-GB-RJ45
WS-X4548-GB-RJ45
WS-X4448-GB-LX
All ports
All modules
describes the guidelines for using different configurations of the send and receive keywords
Send and Receive Keyword Configurations
Description
Enables a local port to send pause frames to a remote port. Enter send on when a
remote port is set to receive on or receive desired.
Prevents a local port from sending pause frames to a remote port. Enter send off
when a remote port is set to receive off or receive desired.
Indicates preference to send pause frames, but autonegotiates flow control. You can
enter send desired when a remote port is set to receive on, receive off, or receive
desired.
Enables a local port to process pause frames that a remote port sends. Enter receive
on when a remote port is set to send on or send desired.
Chapter 5 Configuring Gigabit Ethernet Switching
Ports
All ports except for the
oversubscribed ports listed below
Uplink ports (1–2)
Oversubscribed ports (3–18)
Uplink ports (13–14)
Oversubscribed ports (1–12)
All ports
All ports
All ports
All ports
Ports 1–48
Ports 49–52
All ports
Send
No
No
Yes
No
Yes
Yes
Yes
Yes
No
Yes
No
No
78-15908-01