Monitoring Vmps; Maintaining Vmps - Cisco WS-C2948G-GE-TX Configuration Manual

Chapter 12 Configuring Dynamic VLAN Membership with VMPS

Monitoring VMPS

To display information about MAC address-to-VLAN mappings, perform one of these tasks in privileged
mode:
Task
Show the VLAN to which a MAC address is mapped in
the database.
Show the MAC addresses that are mapped to a VLAN
in the database.
Show ports belonging to a restricted VLAN.
To show VMPS statistics, perform this task in privileged mode:
Task
Show VMPS statistics.

Maintaining VMPS

To clear VMPS statistics, perform this task in privileged mode:
Task
Clear VMPS statistics.
To clear a VMPS server entry from the VMPS client, perform this task in privileged mode:
Task
Clear a VMPS server entry.
To reconfirm the dynamic port VLAN membership assignments, perform this task in privileged mode:
Task
Step 1 Reconfirm dynamic port VLAN membership.
Step 2 Verify the dynamic VLAN reconfirmation status.
This example shows how to reconfirm dynamic port VLAN membership assignments:
Console> (enable) reconfirm vmps
reconfirm process started
Use 'show dvlan statistics' to see reconfirm status
Console> (enable)
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Software Configuration Guide—Release 8.2GLX
78-15908-01
Command
show vmps mac [mac_address]
show vmps vlan vlan_name
show vmps vlanports vlan_name
Command
show vmps statistics
Command
clear vmps statistics
Command
clear vmps server ip_addr
Command
reconfirm vmps
show dvlan statistics
Configuring VMPS
12-9