Specifying The Channel Path Cost; Specifying The Channel Vlan Cost; Clearing Lacp Statistics; Displaying Etherchannel Traffic Utilization - Cisco WS-C2948G-GE-TX Configuration Manual

Chapter 6 Configuring Fast EtherChannel and Gigabit EtherChannel
This example shows how to change the channel mode for ports 4/1 and 4/6, setting it to on. The
administrative key for ports 4/1 and 4/6 is unchanged.
Console> (enable) set port lacp-channel 4/1,4/6 mode on
Port(s) 4/1,4/6 channel mode set to on.
Console> (enable)
Use the show lacp-channel group admin_key command to display the channel mode for ports.

Specifying the Channel Path Cost

You can specify the channel path cost by using a global command that configures both LACP and PAgP.
For more information, see the

Specifying the Channel VLAN Cost

You can specify the channel VLAN cost with a global command that configures both LACP and PAgP.
See the

Clearing LACP Statistics

To clear LACP statistics, perform this task in privileged mode:
Task
Clear LACP statistics.
This example shows how to clear LACP statistics:
Console> (enable) clear lacp-channel statistics
LACP channel counters are cleared.
Console> (enable)

Displaying EtherChannel Traffic Utilization

To display the traffic utilization on the EtherChannel ports, perform this task:
Task
Display traffic utilization.
This example shows how to display traffic utilization on EtherChannel ports:
Console> (enable) show lacp-channel traffic
ChanId Port
------ ----- ------- ------- ------- ------- ------- -------
808
808
816
816
Console> (enable)
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Software Configuration Guide—Release 8.2GLX
78-15908-01
"Setting the EtherChannel Spanning Tree Port Cost" section on page
"Setting the EtherChannel Spanning Tree Port VLAN Cost" section on page 6-9
Rx-Ucst Tx-Ucst Rx-Mcst Tx-Mcst Rx-Bcst Tx-Bcst
2/16 0.00% 0.00%
2/17 0.00% 0.00%
2/31 0.00% 0.00%
2/32 0.00% 0.00%
Command
clear lacp-channel statistics
Command
show lacp-channel traffic
50.00% 75.75% 0.00%
50.00% 25.25% 0.00%
25.25% 50.50% 0.00%
75.75% 50.50% 0.00%
Configuring EtherChannel Using LACP
for information.
0.00%
0.00%
0.00%
0.00%
6-8.
6-21