Attaching Brackets To The Catalyst 3750G-24Ts Switch - Cisco Catalyst 3750 Hardware Installation Manual

Chapter 3 Switch Installation
Figure 3-11 Removing Screws from the Catalyst 3750G-12S Switch
16
C a ta ly st
8
9
10
11
12
Figure 3-12 Removing Screws from the 3750G-24TS Switch
C a ta ly st
3 7 5 0
23 24
23X
25
26
27
28
24X

Attaching Brackets to the Catalyst 3750G-24TS Switch

78-15136-03
3 7 5 0
SE RI ES
Figure 3-12 shows how to remove the chassis screws in a 1.5-RU switch.
SE RI ES
The bracket orientation and the brackets that you use depend on whether you are
attaching the brackets for a 19-inch or a 24-inch rack. For 19-inch racks, use part
number 700-11523-XX; for 24-inch racks, use part number 700-12398-XX.
Figure 3-13 through Figure 3-18
of the switch. Follow the same steps to attach the second bracket to the opposite
side.
show how to attach each type bracket to one side
Catalyst 3750 Switch Hardware Installation Guide
Installing the Switch
3-21