Checking Ethernet And Fast Ethernet Port Connectivity - Cisco WS-C2948G-GE-TX Configuration Manual

Catalyst 4500 series switch
Table of Contents

Advertisement

Configuring Ethernet and Fast Ethernet Ports
This example shows how to display the errdisable timeout configuration:
Console> (enable) show errdisable-timeout
ErrDisable Reason
------------------- ------------
bpdu-guard
channel-misconfig
duplex-mismatch
udld
other
Interval: 300 seconds
Ports that will be enabled at the next timeout:
Port
----- -----------------
3/1
3/8
6/5
7/24 duplex-mismatch
Console> (enable)

Checking Ethernet and Fast Ethernet Port Connectivity

Note
For more detailed information on checking connectivity, see
Connectivity."
Use the ping and traceroute commands to test connectivity out Ethernet or Fast Ethernet ports.
To check connectivity out a port, perform this task in privileged mode:
Task
Step 1
Ping a remote host that is located out the port you
want to test.
Step 2
Trace the hop-by-hop route of packets from the switch
to a remote host that is located out the port you want
to test.
Step 3
If the host is unresponsive, check the IP address and
default gateway that are configured on the switch.
This example shows how to ping a remote host and how to trace the hop-by-hop path of packets through
the network using traceroute:
Console> (enable) ping somehost
somehost is alive
Console> (enable) traceroute somehost
traceroute to somehost.company.com (10.1.2.3), 30 hops max, 40 byte packets
1 engineering-1.company.com (173.31.192.206) 2 ms 1 ms 1 ms
2 engineering-2.company.com (173.31.196.204) 2 ms 3 ms 2 ms
3 gateway_a.company.com (173.16.1.201) 6 ms 3 ms 3 ms
4 somehost.company.com (10.1.2.3) 3 ms * 2 ms
Console> (enable)
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Software Configuration Guide—Release 8.2GLX
4-8
Timeout Status
Enable
Disable
Enable
Enable
Disable
ErrDisable Reason
udld
bpdu-guard
udld
Chapter 4
Configuring Ethernet and Fast Ethernet Switching
Chapter 20, "Checking Status and
Command
ping [-s] host [packet_size] [packet_count]
traceroute host
show interface
show ip route
78-15908-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents