Setting The Garp Timers - Cisco WS-C2948G-GE-TX Configuration Manual

Chapter 15 Configuring Multicast Services
----------- ------------ ---------- --------------------------------------------
Enabled
Enabled
Console> (enable)
Setting Forbidden Registration Mode
Configuring a port in forbidden registration mode deregisters all GMRP multicasts and prevents any
further GMRP multicast registration on the port.
To configure GMRP forbidden registration on a port, perform this task in privileged mode:
Task
Step 1
Configure forbidden registration on a port.
Step 2
Verify the configuration.
This example shows how to configure forbidden registration on port 2/10 and verify the configuration:
Console> (enable) set gmrp registration forbidden 2/10
GMRP Registration is set forbidden on port 2/10.
Console> (enable) show gmrp configuration
Global GMRP Configuration:
GMRP Feature is currently enabled on this switch.
GMRP Timers (milliseconds):
Join = 200
Leave = 600
LeaveAll = 10000
Port based GMRP Configuration:
GMRP-Status Registration ForwardAll Port(s)
----------- ------------ ---------- --------------------------------------------
Enabled
Enabled
Console> (enable)

Setting the GARP Timers

The commands set gmrp timer and show gmrp timer are aliases for set garp timer and show garp
Note
timer.
Note Modifying the GARP timer values affects the behavior of all GARP applications running on the switch,
not just GMRP. (For example, GVRP uses the same timers.)
You can modify the default GARP timer values on the switch.
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Software Configuration Guide—Release 8.2GLX
78-15908-01
Normal Disabled
Fixed Disabled
Normal Disabled
Forbidden Disabled
1/1-4
2/1-9,2/11-48
3/1-24
5/1
2/10
Command
set gmrp registration forbidden mod_num/port_num
show gmrp configuration
1/1-4
2/1-9,2/11-48
3/1-24
5/1
2/10
Configuring GMRP
15-13