Chapter 28 Power Management; Understanding How Power Management Works On The Catalyst 4500 Series Switches - Cisco WS-C2948G-GE-TX Configuration Manual

Power Management
This chapter describes the power management feature in the Catalyst enterprise LAN switches.
For complete syntax and usage information for the commands that are used in this chapter, refer to the
Note
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Command
Reference.
This chapter consists of these sections:
•
•
•
•
•
•
•
Understanding How Power Management Works on the
Catalyst 4500 Series Switches
These sections describe how to manage power for the Catalyst 4500 series switches.
Note For information on power management for the Catalyst 4006 switch, see the
Management Works on the Catalyst 4006 Switch" section on page
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Software Configuration Guide
78-15908-01
Understanding How Power Management Works on the Catalyst 4500 Series Switches, page 28-1
Understanding How Power Management Works on the Catalyst 4006 Switch, page 28-6
Power Consumption for Modules, page 28-9
Migrating a Supervisor Engine II from a Catalyst 4006 Switch to a Catalyst 4500 Series Switch,
page 28-10
Understanding How PoE Works, page 28-11
Configuring Power Management, page 28-14
Configuring PoE, page 28-18
C H A P T E R
"Understanding How Power
28-6.
—
Release 8.2GLX
28
28-1