Vtp Version 3 Show Commands - Cisco WS-C2948G-GE-TX Configuration Manual

Chapter 9 Configuring VTP
Configuring VTP Version 3

VTP Version 3 show Commands

Use the show vtp {conflicts | devices | domain | statistics} command to show other devices in the
domain or devices in the domain with conflicting (conflicts) configurations. Use the domain keyword
to display information that is specific to the VTP domain, and use the statistics keyword to display VTP
statistics. Switches in transparent or off mode are not part of the VTP domain and do not respond to
requests. In addition, clients or servers that do not have a valid database do not respond to requests.
For complete syntax and usage information for the show vtp command, refer to the
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Command
Reference.
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Software Configuration Guide—Release 8.2GLX
9-30
78-15908-01