AT&T MERLIN LEGEND System Reference Manual page 654

Index
Queued call console (QCC), 2-285 — 2-305
Automatic Hold or Automatic Release, 2-291
call types, 2-290, 2-291
elevate priority, 2-291
Extended Call completion, 2-292
fixed features assigned to buttons, 2-287 — 2-289
Message Center operation, 2-293
Operator Hold Timer, 2-291
operator receiving calls, 2-289
Position Busy Backup, 2-293
Queue Over Threshold, 2-292, 2-293
queue priority, 2-290
Return Ring Interval, 2-293
system capacities for, 6-3
R
RAM backup, 5-5
RBS signaling mode for DS1 facility, 4-32
Recall
button with Conference, 2-74
feature description, 2-306 — 2-309
Interval, 2-306
Receive button for Notify, 2-333
Receiver, Message Waiting
fax, 2-222
Group Calling, 2-184
touch-tone (TM), 2-368, 2-369
Receiving calls, sample displays, 2-156, 2-157
Receiving messages, 2-222, 2-223
Record/answer machine, specifications and required
interface, 5-43
Release button
with Conference, 2-74
on QCC, 2-287
Release, Forced, button on QCC, 2-289
Reliable disconnect with Remote Call Forward, 2-171
Reminder Cancel button, 2-310
Reminder Service, 2-310 — 2-312
Cancel, 2-310
Reminder Set button, 2-311
Remote Access, 2-313 — 2-318
barrier codes, 2-314
class of restrictions, 2-314, 2-315
system capacities for, 6-4
system programming report for, F-8
Remote administration. See remote system programming,
2-284
Remote Call Forward. See Forward and Follow Me,
2-170 — 2-180
Remote setting for tie-trunk dial tone, 4-24
Remote system programming, 2-284
Report generation with Call Accounting System (CAS), 3-6
Reports, system programming, F-1 — F-22
Request, Line, 2-218, 2-219
IN-12
Required components
control unit, 1-2, 5-2 — 5-9
telephones, 1-2, 5-10 — 5-18
environmental for control unit, 6-6, 6-7
grounding, 6-8 — 6-10
power for control unit, 6-7, 6-8
Restriction Level, Facility (FRL) for ARS, 2-42
Restrictions, calling, 2-60 — 2-64
Disallowed Lists, 2-136 — 2-139
Facility Restriction Level (FRL) for ARS, 2-60
outward restriction, 2-60
pool dial-out code restriction, 2-60
toll restriction, 2-60
Return, Hold for QCC, 2-291
Return Interval
Call Park, 2-255
Camp-On, 2-70
Transfer, 2-372
Return Ring lnterval for QCC, 2-293
Ring button, Intercom or System Access, 2-350
Ring generator, 5-54
Ring generator and single-line telephones, 5-4
Ring Interval
Delayed, 2-323
Return for QCC, 2-293
Ringback, Transfer audible, 2-372
Ringing/Idle Line Preference, 2-319 — 2-321
Ringing options, 2-322 — 2-328
abbreviated ring, 2-323
delayed ring, 2-323
distinctive ring, 2-324
immediate ring, 2-323
no ring, 2-323
personalized ring, 2-325
Send Ring, 2-325
Robbed-bit signaling mode for DS1 facility 4-32
Rotary dial mode for tie trunks, 4-24
Rotary or touch-tone signaling, 2-368 — 2-370
Rotary signaling for DID trunks, 4-26
RS-232 jacks in control unit, 5-4
S
SAA, 5-29
SASS, 4-28
Saved Number Dial, 2-329 — 2-332
Secondary Delay Interval, 2-85
Secondary Individual Coverage, 2-84, 2-85
Selection, Automatic Line, 2-36, 2-38
Selective Callback, 2-53
Send button for Notify, 2-333