AT&T MERLIN LEGEND System Reference Manual page 650

Index
Individual Pickup, 2-267
extension, 2-267
general, 2-267
line, 2-267
Individual Speakerphone Paging, 2-248
Individual use data stations, 1-10 — 1-12
Information service with AUDIX Voice Power — IS II (AVP),
3-17
Input/output bus in control unit, 4-3, 5-3
Inside (system) Dial Tone, 2-207
Inside Auto Dial, 2-30
Inspect
feature description, 2-208 — 2-210
screen on MLX display telephones, 2-142, 2-208
Integrated Services Digital Network (ISDN) - Primary Rate
Interface (PRI)
report format for SMDR, 2-343
system programming report for, F-7
BRI S/T protocol, 5-8
type of DS1 facility, 4-28, 4-29
Integrated Solution II (IS II), 3-17 — 3-24
Integrated VMI group type for Group Calling, 2-186
Integrated Voice Power Automated Attendant (IVP AA), 3-17
Intercom buttons, 2-350, 2-351
Key mode, 4-8
Intertandem tie-trunk network,
Interval
Call Park Return, 2-255
Camp-On Return, 2-70
Coverage Delay, 2-68
Delayed Ring, 2-323
Hold Disconnect, 2-202
Recall, 2-306
Return Return for QCC, 2-293
Secondary Delay, 2-85
Transfer Return, 2-372
I/O bus in control unit, 4-3, 5-3
In/out of service, VMl ports, 3-5
IROB protection units, 5-49, 5-51
IS II, 3-17 — 3-24
ISDN 7500B Data Module
and 008 MLX station module, 5-8
and modem pools, 1-12
features, 5-26, 5-27
hardware description, 5-24
overview, 1-9
with MLX telephones, 5-25
ISDN - PRI
system programming report for, F-7
BRI S/T protocol, 5-8
report format for SMDR, 2-343
IVP AA, 3-17
I N - 8
1-20
J
Jack
pairs for Simultaneous Voice and Data Feature, 2-382
power failure transfer, 4-37, 5-53
RS-232 in control unit, 5-4
VMI, 3-3
Join
setting on GPA, 5-23
Join button on QCC, 2-287
K
Key mode, 4-7 — 4-11
FCC registration, 4-10
features not available, 4-8
line access, 4-8, 4-9
types of lines/trunks, 4-7, 4-8
unit loads for, 6-10
KF classification for FCC registration
in Behind Switch mode, 4-21
in Key mode, 4-11
KS22911 telephone power unit
hardware description, 5-48
with DSS, 5-49
with MFM, 5-49
KS22911 L1 telephone power unit
with DSS, 5-38
with MFM, 5-22
L
Labeling, 2-211 — 2-214
system programming report for, F-4
LAN workstation access, 1-14
Large system capacities, 6-1
Last Number Dial, 2-215 — 2-217
LCD display with Call Accounting Terminal (CAT), 3-10
Leave Message, 2-221, 2-222
Line access
Behind Switch mode, 4-19, 4-20
Hybrid/PBX mode, 4-14, 4-15
Key mode, 4-8, 4-9
Line coding for DS1 facility, 4-30
zero code suppression (ZCS), 4-30
Line compensation for DS1 facility, 4-31
Line Pickup, 2-267
Line Preference. See Ringing/Idle Line Preference,
2-319—2-321
Line Request, 2-218, 2-219