AT&T MERLIN LEGEND System Reference Manual page 380

Features
Feature Interactions
Auto Dial
Automatic Route Selection
Directory
Direct Station Selector
Display
Microphone Disable
Saved Number Dial
Queued Call Console
Speed Dial
Station Message Detail
Recording
System Access
A numbered dialed by pressing a programmed outside Auto Dial button is
saved for Saved Number Dial as if it were dialed with the dialpad, but special
characters do not work. An extension dialed by pressing a programmed inside
Auto Dial button is not saved for Saved Number Dial.
The ARS dial-out code is saved with the telephone number dialed.
Saved Number Dial does not store numbers dialed by using a Personal,
Extension, or System Directory listing.
An extension dialed by pressing a DSS button is not stored for Saved Number
Dial.
When a user presses a programmed Saved Number Dial button, the digits
appear on the display as if the MLX display telephone user were dialing them
from the dialpad.
When an MLX telephone user's microphone is disabled, pressing a Saved
Number Dial button before lifting the handset turns on the speakerphone so the
user can hear the number being dialed. However, the user must lift the handset
to talk once the call is answered.
Saved Number Dial cannot be used on an MFM.
Saved Number Dial cannot be used on a QCC.
Telephone numbers that are dialed by using a Personal Speed Dial are stored
by Saved Number Dial. If the number includes a special character such as
Pause or Stop, the special characters do not work when the number is redialed
by using Saved Number Dial. Telephone numbers that are dialed by using a
System Speed Dial code are not stored by Saved Number Dial.
All numbers dialed on an outside call by using Saved Number Dial are recorded
on the SMDR report.
In the Hybrid/PBX mode, when Saved Number Dial is used on a call made with a
Shared System Access button, the number is stored on the telephone by using
Saved Number Dial and not on the principal station.
Saved Number Dial 2-331