AT&T MERLIN LEGEND System Reference Manual page 390

Features
Disallowed Lists
Forced Account Code
Entry
Hold
Labeling
Last Number Dial
Pools
Queued Call Console
Recall
A user with an unrestricted telephone cannot dial an outside number by using
Personal Speed Dial or System Speed Dial if the number is on a Disallowed List
assigned to the telephone, unless the number is dialed using a marked System
Speed Dial code. If the number is dialed by using a marked System Speed Dial
code and the number includes both a toll telephone number and an access
number, dialing the number overrides any Disallowed List assignment.
Multiline telephone users who use a programmed Account Code button or
display telephone users who select the feature from the display can use
Personal Speed Dial and System Speed Dial to dial account codes. Single-line
telephone and multiline telephone users who complete the entry by dialing a #
cannot use Personal Speed Dial or System Speed Dial to dial account codes
since the # required to use Speed Dial is also used to activate Account Code
Entry.
The Hold button is pressed to enter the Pause special character in Personal
Speed Dial or System Speed Dial telephone numbers.
The telephone numbers associated with System Speed Dial codes are
programmed by using the same series of programming screens as those used
to program labels for System Directory listings.
Telephone numbers that are dialed by using Personal Speed Dial are stored by
Last Number Dial. If the stored number includes a special character, such as
Pause or Stop, the special characters do not work when the number is redialed
by using Last Number Dial.
Telephone numbers that are dialed by using a System Speed Dial code are not
stored by Last Number Dial.
A pool dial-out code can be programmed on Personal Speed Dial and System
Speed Dial numbers. When a pool dial-out code is included in the number
dialed, one or two Pause characters must be programmed immediately
following the dial-out code to allow time to receive a local telephone company
dial tone. Pause characters are entered by pressing the Hold button.
Personal Speed Dial and System Speed Dial cannot be used to dial numbers on
a QCC. The Directory features can be used instead.
The Conference button is pressed to enter the Flash special character, which
simulates pressing the Recall button, in a Personal Speed Dial or System Speed
Dial telephone number.
Speed Dial
2-341