AT&T MERLIN LEGEND System Reference Manual page 205

Features
Table 2-11 Continued
Feature/Function Description
Program Mode, Status feedback messages are
continued shown on analog multiline
telephones when features that
affect telephone operation are
programmed. Status messages are
not shown on MLX telephones.
(For more on Extension
Programming, see Appendix B,
General Telephone Programming
Instructions.)
Recall
When an MLX telephone user
presses a programmed Recall
button while on an outside line, the
line information is re-displayed just
as if the user had gone off-hook on
the line.
Receiving Calls For inside calls, the display shows
the name of the caller (if labels
have been programmed) and/or
the extension number. On analog
multiline telephones, the display
also shows if the call is a voice (V)
call or a ringing (R) call.
For outside calls, the display
shows the line the call came in on.
If automatic number identification
(ANI) is available, the number of
the caller is shown on page 2 on
MLX telephones. This information is
provided for transferred,
forwarded, calling group, and
incoming calls.
Note: For calls received on tie
trunks, the display shows
information only if the user
preselects the button.
Continued
2-156 Display
Analog Multiline
MLX Display
Display
n/a
Voice announce
On/Off
Call Waiting
On/Off
Automatic
Callback On/Off
Shared SA Ring
On/Off
Abbreviated
Ring On/Off
Coverage Inside
On/Off
n/a FX-NYC
Sally - X1234
Sally - Ext R
FX-NYC FX-NYC
n/a
FX-NYC 5551234