AT&T MERLIN LEGEND System Reference Manual page 645

Index
Bipolar 8 zero substitution (B8ZS) line coding for DS1 facility,
4-30
BIS telephones, 5-15
Broadcast Lists with MERLIN MAIL Voice Messaging
System, 3-29
Built-in data modem, 4-3, 5-4
Bus
input/output in control unit, 4-3, 5-3
time-division multiplex in control unit, 4-3
Busy, Automatic Maintenance, 2-39, 2-40
Busy-out, power failure for DID trunks, 4-33
Busy, Position Backup for QCC, 2-293
Busy, Position button on QCC, 2-288
C
Calendar, sample display, 2-145
Call Accounting System, 3-6 — 3-9
Call Accounting System-lS II (CAS), 3-17
Call Accounting Terminal (CAT), 3-10 — 3-12
Call Answer
with AUDIX Voice Power—lS II (AVP), 3-17
with MERLIN MAIL Voice Messaging System, 3-28
Call buttons on QCC, 2-287
Call information
available on display telephones, 2-140 — 2-158
available using inspect, 2-208 — 2-210
recorded with SMDR, 2-343
Call length (duration) recorded with SMDR, 2-343
Call Management System (CMS), 3-13 — 3-16
Call Park Return Interval, 2-255
Call record processing with Call Accounting System (CAS),
3-6
Call report format for SMDR, 2-343
Call types for QCC, 2-290, 2-291
Call Waiting, 2-65, 2-69
Callback, 2-53 — 2-59
automatic, 2-53
selective, 2-53
system capacities for, 6-2
Calling group supervisor position, 2-183
Calling restrictions, 2-60 — 2-64
Disallowed Lists, 2-136 — 2-139
Facility Restriction Level (FRL) for ARS, 2-60
outward restriction, 2-60
pool dial-out code restriction, 2-60
toll restriction, 2-60
Calls-in-Queue
Alarm for Group Calling, 2-185
Alarm threshold for Group Calling, 2-185
alert for QCC, 2-291
Camp-On, 2-70 — 2-73
Return Interval, 2-70
Cancel
button on QCC, 2-287
Callback request, 2-54
Forward and Follow Me, 2-172, 2-173
message sent, 2-222
Reminder Service, 2-310
voice announcements, 2-382
Capabilities
data, 1-8 — 1-15
DS1 facilities, 1-21
modes of operation, 4-7 — 4-22
modes of operation, 1-7
network, 4-23 — 4-32
networking, 1-16 — 1-20
system capacities, 6-1 — 6-5
system capacities, 1-21
applications, 3-2
hardware and software, 6-2 — 6-5
Capacities
large system, 6-1
small system, 6-1
time-slot, 6-1
of system, 6-1 — 6-5
of system, overview, 1-21
Carriers in control unit
as functional unit, 4-1
dimensions, 6-6
hardware description, 5-2
system capacities for, 6-2
unit load calculation, H-1 — H-7
CAS, 3-6 — 3-9
CAS — Hospitality. See Call Accunting System (CAS),
3-6 — 3-9
CAS — Plus. See Call Accounting System (CAS), 3-6 — 3-9
CAT, 3-10 — 3-12
CCS signaling mode for DS1 facility, 4-32
Center, Message operation for QCC, 2-293
centralized telephone programming, 2-281
Channel Service Unit (CSU)
551 T1 L1, 5-19
ESF T1 and B8ZS line coding, 4-30
ESF T1 hardware description, 5-19
Circular hunt type for Group Calling, 2-163
Class of restrictions for Remote Access, 2-314, 2-315
Class of Service with Integrated Solution II (IS II), 3-18
Clock synchronization for DS1 facility, 4-31
CMS, 3-13 — 3-16
Codec, 4-3
Codes
Automatic Route Selection (ARS) access, 2-43
barrier for Remote Access, 2-314
barrier, system capacities for, 6-4
feature, general instructions for using, C-2
Idle Line Preference dial, 2-319
park zone, system capacities for, 6-3
Personal Speed Dial, 2-336
pool dial-out, 2-272
pool dial-out restriction, 2-60
product ordering, A-1 — A-9
System Speed Dial, 2-337
I N - 3