Figure 11. E1 PRI Protocol Configuration dialog box (top half)
Figure 12. E1 CAS Protocol Configuration dialog box (top half)
Selecting Span Types
E1 CAS—select this option to associate all channels on the span to E1 channel
•
associated signaling.
Regular ISDN PRI—select this option to indicate 30B+D ISDN PRI span and to
•
designate the 16th channel as the D channel.
Custom ISDN PRI—this option is not available.
•
Enable Tie Trunk—check this box to enable a tie trunk. Tie trunks must terminate
•
to a system also configured as a tie trunk.
Note:
This option not available when T1 CAS is selected.
Chapter 5: Board Configuration
AltiWare ACC 5.1 Administration Manual 87