Adding An Analog Terminal Adapter (Ata) - 3Com 3C10111C - NBX 100 - Modular Exp Base Installation Manual

128 C 5: A
HAPTER NALOG
Adding an Analog
Terminal Adapter
(ATA)
D
EVICES
3C10117C Analog Terminal Card
Each port has a single status light.
Table 23 Status Light Patterns (3C10117C)
Light Pattern
All lights show a fast
steady blink
All lights are on
Slow non-symmetric
flashing
Off for 9 to 10
seconds, on briefly
On for 9 to 10
seconds, off briefly
To add an Analog Terminal Adapter (ATA) to your NBX system you must
first enable the Auto Discover feature. You Auto Discover an Analog
Terminal Adapter (ATA) in the same way that you discover 3Com
telephones and Analog Terminal Cards.
1 In the NBX NetSet - Main Menu window, click System Configuration. The
System Configuration dialog box appears.
2 Click System-wide. The System Settings dialog box appears.
3 Clear all check boxes associated with Auto Discover.
4 Click the Auto Discover Telephones check box to select it.
The Auto Discover Telephones check box enables and disables the Auto
Discover process for Analog Terminal Cards, Analog Terminal Adapters,
and 3Com Telephones.
5 Click OK.
Table 23
Meaning
The card is waiting for the completion of a software
download operation.
The software has been downloaded and the flash memory
on the card is being loaded.
The card is trying to find the Call Processor.
The phone attached to this port is on hook. There is no call
active.
The phone attached to this port has been taken off hook
for a call.
explains each light pattern.