Analog Line Cards; Auto Discover Analog Line Cards - 3Com 3C10111C - NBX 100 - Modular Exp Base Installation Manual

4
Auto Discover

Analog Line Cards

A
NALOG
This chapter tells you how to install and how to verify the successful
installation of Analog Line Cards.
For information about installing the system hardware components, see
Chapter 2.
Each NBX Analog Line Card provides access for up to four analog
telephone lines into your NBX system. The NBX system treats a line card
port as an extension and assigns a unique extension number to each port.
You use the Auto Discover feature to detect Line Card ports, and you
define the starting address used by the Auto Discover process in the
system dial plan. For a 3-digit dial plan, the default starting address is
750; for a 4-digit dial plan, the starting address is 7250. The Auto
Discover process assigns the first unassigned number to the first Line
Card port.
Before you install any Analog Line Cards, you may want to configure the
Outdialing Prefixes. For information on this topic, see "Outdialing Prefix
Settings" in Chapter 2 of the Administrator's Guide or the Help for Dial
Plan > Operations > Set Outdial Prefixes.
To Auto Discover an Analog Line Card:
1 In the NBX NetSet - Main Menu window, click System Configuration.
2 Click the System Settings tab.
3 Click the System-wide button.
4 Clear all check boxes associated with Auto Discover.
5 Enable Auto Discover Line Cards.
6 Click OK.
L C
INE ARDS