Verifying Analog Terminal Card Ports; Using The Nbx Netset Utility - 3Com 3C10111C - NBX 100 - Modular Exp Base Installation Manual

126 C 5: A
HAPTER NALOG
Verifying Analog
Terminal Card Ports
Using the NBX NetSet
Utility
D
EVICES
After you have used the Auto Discover feature to add an Analog Terminal
Card, you can verify that the card is properly installed by using the NBX
NetSet utility, described next, and by examining the status lights on the
front of the card, which are described on
To verify the proper installation of an Analog Terminal Card using the NBX
NetSet utility:
1 In the NBX NetSet - Main Menu window, click Device Configuration.
2 In the Device Configuration dialog box, click the ATA tab. (See
Figure 43 ATA Tab
3 Compare the MAC addresses or port numbers that appear in the list to
the MAC address and port numbers you recorded before you inserted this
card.
The four ports of the Analog Terminal Card appear in the list of ATAs,
along with the ports of any previously discovered Analog Terminal Cards,
and any Analog Terminal Adapters (ATAs).
Each of the four ports on an Analog Terminal Card has a MAC address.
For the 3C10114 card, the MAC address is based on, but not identical to,
the MAC address of the card.
addresses for an Analog Terminal Card and the ports on the card. For the
page 127.
Table 22 shows a sample set of MAC
Figure 43.)