Initial System Configuration - 3Com 3C10111C - NBX 100 - Modular Exp Base Installation Manual

Initial System To use the Auto Discover feature for initial system configuration:
Configuration
1 Log in to the NBX NetSet utility using the administrator username and
password.
2 In the NBX NetSet - Main Menu window, click
3 In the System Configuration dialog box, click the System Settings tab.
4 Click
Figure 33 System Settings Dialog Box
5 Select the check box for the device you are configuring. 3Com
recommends that you Auto Discover one device type at a time.
describes each choice.
Using Auto Discover for Initial System Configuration
. The System Settings dialog box appears
System-wide
System Configuration
(Figure 33).
Table 14
93
.