Verifying Extension Assignments On An Attendant Console; Attendant Console Labels - 3Com 3C10111C - NBX 100 - Modular Exp Base Installation Manual

Verifying Extension
Assignments on an
Attendant Console
Attendant Console
Labels
associated with extension 1000, the new Attendant Console will also
be associated with extension 1000.
The system will map up to 100 extensions to the Attendant Console.
■
These extensions will always be the lowest 100 extensions even if
these extensions are already mapped to an existing Attendant
Console. To map other extensions to an Attendant Console, you must
map the extensions manually using the Attendant Console Button
Mappings screen in the NBX NetSet utility.
Typically, you want to associate an Attendant Console with the telephone
beside it. If the Auto Discover process associates an Attendant Console
with a telephone other than the one you want, see
Attendant Console with a Specific Telephone"
instructions on how to change the association.
After you Auto Discover an Attendant Console, you can verify which
telephone extensions have been assigned to the Attendant Console
buttons.
To verify the extension assignments:
1 In the NBX NetSet - Main Menu window, click Device Configuration.
2 Click the Attendant Console tab.
3 Select the Attendant Console from the list.
4 Click the Button Mappings button. The Attendant Console Button
Mappings dialog box appears.
For more about button mappings on an Attendant Console, see
Chapter 3, "Device Configuration," in the NBX Administrator's Guide.
You can create and print Attendant Console labels using the NBX
LabelMaker utility.
To download the LabelMaker utility:
1 Log into NBX NetSet as an administrator.
2 Click Downloads > LabelMaker.
After you print the labels and then cut them out, remove the plastic cover
from the Attendant Console and install the labels. On the 3Com 3105
Adding a 3Com Attendant Console
"Associating an
on page 89
117
for