Bri-St Digital Line Card - 3Com 3C10111C - NBX 100 - Modular Exp Base Installation Manual

6
BRI-ST D
This chapter tells you how to install and verify the successful installation
of the ISDN BRI-ST (Basic Rate Interface) Digital Line Card.
For information about installing the system hardware components, see
Chapter 2.
The following sections describe how to add and configure a BRI-ST Digital
Line Card to handle four BRI spans using the ST interface. In this section,
and in the NBX NetSet utility, digital line cards are referred to as cards and
boards.
This section covers the following topics:
Adding a BRI-ST Digital Line Card
■
Verifying a BRI-ST Digital Line Card
■
An NBX 100 system can accommodate up to 12 BRI-ST cards and a
SuperStack 3 NBX system can accommodate up to 90 BRI-ST cards using
ISDN BRI-ST signaling. Each BRI-ST card (3C10164-S/T) supports the Basic
Rate Interface protocol (ST interface only).
Before you install any BRI-ST Digital Line Cards, you may want to
configure the Outdialing Prefix settings. For information on this topic, see
the "Outdialing Prefix Settings" section in Chapter 2, "Dial Plan," in the
NBX Administrator's Guide or the Help: Dial Plan > Operations >
Set Outdial Prefixes.
L
IGITAL INE
C
ARD