3Com 3C10111C - NBX 100 - Modular Exp Base Installation Manual page 89

3 Auto Discover the Attendant Console. From the NBX Main Menu, click
System Configuration > System Settings > System-wide and then enable
the check box labeled Auto Discover Attendant Consoles.
Attendant Console Notes
An Attendant Console must be associated with only one 3Com
■
telephone. When you Auto Discover an Attendant Console, the NBX
system associates it with a telephone based on the following factors:
If there are no other Attendant Consoles on the system, the system
■
associates the new Attendant Console with the telephone that has
the lowest extension number.
If one or more Attendant Consoles are already configured, the
■
system, finds all the telephones that currently have an associated
Attendant Console and associates the new Attendant Console
with the 3Com Business Telephone that has the lowest extension
number.
Typically, you want to associate an Attendant Console with the
■
telephone to which it is connected. If the Auto Discover process
associates an Attendant Console with a telephone other than the one
you want, see
Telephone" next for instructions on how to associate the Attendant
Console with a different telephone.
When automatically mapping extensions to an Attendant Console,
■
the system maps the first 100 extension to Attendant Console buttons
except for the extension associated with the Attendant Console. If you
add a second Attendant Console to the system, that Attendant
Console will also have the first 100 extensions mapped to its buttons.
To map extensions above the first 100, you must manually map the
extensions. For more about manually adding an Attendant Console
and mapping Attendant Console buttons, see Chapter 3, "Device
Configuration," in the NBX Administrator's Guide.
Associating an Attendant Console with a Specific Telephone
To associate an Attendant Console with a specific telephone:
1 In the NBX NetSet - Main Menu window, click Device Configuration.
2 In the Device Configuration window, click the Attendant Console tab.
3 Select an Attendant Console from the list.
4 Click Modify.
"Associating an Attendant Console with a Specific
Connecting Cards and Devices 89