Troubleshooting
WA R N I N G
If the clamp meter fails to operate, check the battery and test leads.
Replace them if necessary. After that, if the instrument still does not
function, check to ensure that you have followed the operating procedures
given in this instruction manual, before considering servicing the clamp
meter.
When servicing the instrument, use only the specified replacement parts.
Table 5- 1
Table 5-1 Basic troubleshooting procedures
Malfunction
No annunciator display
after switching on
No beeper tone
User's and Service Guide
To avoid electrical shock, do not perform any servicing unless you
are qualified to do so.
will assist you in identifying some basic problems.
Troubleshooting procedure
Check battery. Replace battery if necessary.
Check the setup mode menu to verify whether the beeper function has been set
to off. If so, select the desired driving frequency.
Maintenance
5
Troubleshooting
81