Default Jumper And Switch Settings; Introduction; Jumper And Switch Settings - Agilent Technologies 4339B Service Manual
High resistance meter
Hide thumbs
Also See for 4339B:
- Manual change (18 pages) ,
- Operation manual (287 pages) ,
- User manual (46 pages)
Table of Contents
Advertisement
B
Default Jumper and Switch Settings
Introduction
This appendix describes the setting of the jumpers and switches on the A2 CPU Board
Assembly. Use this information when replacing the A2 Assembly.
Jumper and Switch Settings
Figure B-1 shows the default Jumper and Switch Settings. When the A2 CPU Board Assembly
is replaced, set the jumpers and switches to the default side as shown in the gure.
Figure B-1. Jumper and Switch Settings
Default Jumper and Switch Settings
B-1
Advertisement
Table of Contents
Troubleshooting
