3
Functions and Features
Data Hold (Trigger Hold)
Data Hold (Trigger Hold)
The data hold operation allows you to capture and hold a reading
instantaneously through trigger function. You will have to enable the data
hold in setup menu before using the data hold operation. See
Data Hold/Refresh Hold mode"
Enabling the data hold function
1 Ensure that the data hold operation is enabled in the setup menu.
2 Press Hold/Max Min to enable the data hold operation.
3 The annunciator display will indicate DH and the data hold function is
4 Press Hold/Max Min again to trigger.
5 Press Hold/Max Min for more than 1 second to exit the data hold
52
enabled.
operation.
on page 70 for more information.
"Setting
User's and Service Guide