1
Getting Started
Product at a glance
The clamp jaw at a glance
The clamp jaw is used to perform current measurement without having to
make physical contact with or disconnecting the conductor. The clamp jaw
can be opened and closed, allowing a maximum opening of 2 inches. Press
the handle of the clamp meter to open the clamp jaw. When measuring
current, there are 3 jaw markings to observe. Current is measured
accurately by placing the conductor in the middle of the 3 jaw markings.
See
on performing current measurements.
Figure 1-8 Clamp jaw close and open state
32
"Performing Current Measurement"
on page 36 for more information
User's and Service Guide