Features
The key features of Agilent U1211A, U1212A, and U1213A Clamp Meters
are:
• AC, DC, and AC+DC (for U1213A only) voltage and current
• True RMS measurement for both AC voltage (ACV) and AC current
• Orange LED backlight.
• Resistance measurement up to 40 MΩ (for U1213A only).
• Capacitance measurement up to 4000 µF.
• Frequency measurement up to 200 kHz.
• 1 ms peak hold to capture in- rush voltage and current easily.
• Diode and audible continuity tests.
• K- type thermocouple for temperature measurement.
• Frequency and duty cycle measurements.
• Dynamic recording for min, max, and average readings.
• Data hold with manual trigger and null mode.
• Hand guard to prevent contact with conductors.
• Closed case calibration (except for U1212A and U1213A where open
User's and Service Guide
measurements.
(ACA).
case calibration is needed for balance adjustment).
Getting Started
1
Introduction
21