Setting auto power-off mode
To enable auto power- off mode, set its timer to any value within the range
of 1 to 99 minutes.
The instrument will turn off automatically (with auto power- off mode
enabled) after the specified amount of time, if none of the following
happens within that time:
• Any button is pressed.
• A measurement function is changed.
• Dynamic recording is enabled.
• 1 ms peak hold is enabled.
• Auto power- off mode is disabled in the setup mode.
To reactivate the clamp meter after auto power- off, simply press any
button.
To disable auto power- off mode, select OFF. When the auto power- off
mode is disabled,
clamp meter will remain turned on until you manually turn the rotary
switch to the OFF position.
Initial
Press
to edit the value
User's and Service Guide
in the annunciator display will be turned off. The
or
Default Factory Settings and Available Setting Options
Press
or
to edit the value
Press
Press
Press
Changing the Default Settings
4
Press
71