Performance Tests and Calibration
6
Calibration Overview
Adjustment recommendation
Specifications are only guaranteed within the period stated from the last
adjustment. Agilent recommends that re- adjustment should be performed
during the calibration process for best performance. This will assure that
the U1211A, U1212A, and U1213A clamp meters will remain within the
specifications for the next calibration interval. This criterion for the
re- adjustment provides the best long- term stability.
Performance data are measured during the performance verification tests
but this does not guarantee that the instrument will remain within these
limits unless the adjustments are performed.
Refer to
"Adjustment count"
on page 115 and verify that all the
adjustments have been performed.
User's and Service Guide
85