5
Maintenance
General Maintenance
General Maintenance
WA R N I N G
Dirt or moisture in the terminals can distort readings. Cleaning
procedures are as follows:
1 Turn the clamp meter off and remove the test leads.
2 Turn the clamp meter over and shake out any dirt that may have
3 Wipe the case with a damp cloth and mild detergent — do not use
78
Ensure that terminal connections are correct for a particular
measurement before making the measurement. To avoid damaging
the device, do not exceed the rated input limit.
accumulated in the terminals.
abrasives or solvents.
User's and Service Guide