Set Setup Callhome; Call Home Service Configuration Attributes - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

set setup callhome

Description Configures the Call Home database for managing e-mail notifications of fabric problems.
Authority Admin session
Syntax
set setup callhome
Prompts you in a line-by-line fashion to configure the Call Home database.
Call Home configuration attributes.
Table 39
Parameter
PrimarySMTPServerAddr
PrimarySMTPServerPort
PrimarySMTPServerEnabled
SecondarySMTPServerAddr
SecondarySMTPServerPort
SecondarySMTPServerEnabled
ContactEmailAddress
PhoneNumber
StreetAddress
FromEmailAddress
ReplyToEmailAddress
ThrottleDupsEnabled
176 Command reference

Call Home service configuration attributes

Description
IP address of the primary SMTP server. The default is
0.0.0.0.
Service port number that the primary SMTP server is
monitoring for SMTP agents. The default is 25.
Enables (True) or disables (False) the primary SMTP
server. The default is False.
IP address of the secondary SMTP server. The default is
0.0.0.0.
Service port number that the secondary SMTP server is
monitoring for SMTP agents. The default is 25.
Enable (True) or disable (False) the secondary SMTP
server. The default is False.
E-mail address of the person to be notified to respond to
the e-mail message. The format is account@domain.
This information is included in the e-mail message when
the profile format is FullText.
Contact phone number to be included in the e-mail
message text. This information is included in the e-mail
message when the profile format is FullText.
Contact street address to be included in the e-mail
message text. This information is included in the e-mail
message when the profile format is FullText.
E-mail address that is defined as the sending address in
the From: field of the e-mail message. The format is
account@domain. This field is required. Undeliverable
messages are returned to this address unless overridden
by the ReplayToEmailAddress parameter.
E-mail address that is to receive replies to the outgoing
e-mail message. The format is account@domain. This
parameter overrides the FromEmailAddress
parameter.
Enables (True) or disables (False) the throttling of
duplicate e-mail messages in the message queue. When
enabled, duplicate e-mail messages that enter the queue
within 15 seconds of the original are suppressed. The
original message is sent with a report of the number of
suppressed duplicates. The default is True.
Table 39 describes the