Download  Print this page

Installing A Memory Module; Supported Dimm Configurations; Memory Module Requirements - HP Xw4600 - Workstation - 2 GB RAM Technical Reference Manual

Hp xw4600 workstation - service and technical reference guide.
Hide thumbs

Advertisement

2.
Push gently outward on the socket levers (1).
Figure 5-21
3.
Lift the DIMM straight up and out of the socket. Store the DIMM in an anti static bag (2).

Installing a memory module

This section describes how to install a memory module.

Supported DIMM configurations

The HP xw4600 Workstation supports these memory module configurations:
512 MB to 8 GB RAM
Four DIMM slots
Dual-channel DIMMs

Memory module requirements

CAUTION:
Because third-party DIMMs might not be electrically or thermally compatible, they are not supported by
HP.
NOTE:
DIMMs and their sockets are keyed for proper installation. Be sure these guides line up when
installing DIMMs.
Use only industry-standard, unbuffered, PC2–5300E (667 MHz) or PC2–6400E (800 MHz) DIMMs.
If multiple DIMMs are installed in a workstation, they must be installed in pairs of the same size and type
in each channel.
ENWW
Removing a memory module
HP only ships DIMMs that are electrically and thermally compatible with this workstation.
Removing and replacing components
73

Advertisement

Table of Contents

   Also See for HP Xw4600 - Workstation - 2 GB RAM

   Related Manuals for HP Xw4600 - Workstation - 2 GB RAM

Comments to this Manuals

Symbols: 0
Latest comments: