●
Enter the Asset Tag or property identification number assigned by your company to this
workstation.
●
Enable power-on password prompts during system restarts (warm-boots) and power on.
●
Hide or show the integrated I/O functionality, including serial, USB, or parallel ports, audio, or
embedded NIC. Any hidden devices are inaccessible which increases overall system security.
●
Enable or disable removable media boot ability.
●
Enable or disable removable media write ability (if supported by hardware).
●
Replicate your system setup by saving system configuration information on CD or diskette and
restoring it on one or more workstations.
●
Execute self-tests on specified SATA and SAS hard drives (if supported by the drive).
ENWW
Computer Setup (F10) Utility
25